Step 5: Checking the connection
Playing pictures recorded on a tape on your computerBefore following the procedure below, start up ImageMixer Ver.1.5 for Sony and check the connection.
bNote
•Before following the procedure below, make sure you remove the “Memory Stick” from the camcorder.
1
2 Click (Capture Environment).
3 Click (USB Device Capture Mode) if you are connecting via a USB
cable, or click (DV Camcorder Capture Mode) if you are connecting
via an i.LINK cable (DV format models only).
|
|
| Connecting | |
4 | Prepare the power source for your | |||
| ||||
| camcorder, then slide the POWER |
| ||
| switch repeatedly to select the PLAY/ | to | ||
| EDIT mode. | |||
| a | |||
|
|
| ||
| Use the supplied AC Adaptor as the power | Windows | ||
| Operations Guide supplied with your | |||
| source. |
| ||
| For details, refer to the separate Camera |
| ||
| camcorder. | computer | ||
|
|
| ||
5 | Touch | |||
| ||||
| PLY/EDT], then touch to select [USB |
| ||
| STREAM]. |
| ||
| For details, refer to the separate Camera |
| ||
| Operations Guide supplied with your |
| ||
| camcorder. |
| ||
| This operation is not necessary when |
| ||
| connecting the camcorder to the computer |
| ||
| via an i.LINK cable (p. 16). |
|
6 Connect your camcorder to the computer (p. 13).
,continued
Connecting to a Windows computer 17