10Touch [MARK OUT].
The ending point of the first program is set, and the lower part of the program mark changes to light blue.
PROG. EDIT | 0:00:00:00 | |||||
MARK | START | EDIT | UNDO | |||
IN | SET | |||||
|
|
| ||||
|
|
|
|
|
| |
|
|
|
|
|
| |
TOTAL 0:00:00:12
SCENE 1
END
11Repeat steps 7 to 10 and create programs.
12Set your VCR to recording pause.
Skip this step if your camcorder is connected via an i.LINK cable or recording on a “Memory Stick Duo.”
13Touch [START].
START0:00:00:00
ENGAGE
CANCELEXEC
REC PAUSE
TOTAL 0:00:00:25
SCENE 3
14Touch [EXEC].
A search for the beginning of the first program starts, then the recording starts. [SEARCH] appears during the search and [EDITING] appears during editing.
| SEARCH | ||||
| SCENE 1/3 |
|
|
| |
|
|
|
|
|
|
| CANCEL |
|
| END |
|
|
|
|
|
|
|
When a program is recorded, the program mark changes from orange to light blue. When all programs have been recorded, the program editing operation stops automatically.
To cancel recording, touch [CANCEL].
To end Digital program editing
Touch [END].
To save a program without using it to record
Touch [END] in step 11.
The program is stored in memory until the cassette is ejected.
To erase programs
1Follow steps 1 to 6 in “Recording the selected scenes as programs” (p. 103), then touch [UNDO].
2Touch [DEL 1MARK] to delete the last set program. Or, touch [ALL ERASE] to erase all the programs.
3Touch [EXEC].
The programs are deleted.
To cancel this operation, touch [CANCEL].
bNote
•You cannot set starting point or ending point on a blank section of the tape. If there is a blank section in the picture set as a program, the total time may not appear correctly.
•When you cannot operate the device correctly using an i.LINK cable connection, select [IR] in step 11 on page 99, and set the [IR SETUP] code.
104Dubbing/Editing