Manuals / Brands / Photography / Camcorder / Sony / Photography / Camcorder

Sony Recording, Movies, Still Images, 3 Start recording, Recording/Playback, Press START/STOP A (or B), 2 Turn the POWER switch until the respective lamp lights up

Models: DCR-SR200E DCR-SR290E DCR-SR300E DCR-SR32E DCR-SR42E DCR-SR62E DCR-SR82E

1 36

Download 36 pages, 2.12 Mb

Recording

Lens cover switch (DCR-SR32E/SR42E/

SR52E/SR62E/ START/STOP A SR72E/SR82E)

[STBY] t [REC]

POWER switch

	PHOTO
START/STOP B	Flashing t Lights up

EASY button

1 Slide the lens cover switch to open (DCR-SR32E/SR42E/SR52E/SR62E/SR72E/ SR82E).

• For DCR-SR190E/SR200E/SR290E/SR300E, the lens cover opens and closes automatically.

2 Turn the POWER switch until the respective lamp lights up.

Press the green button only when the POWER switch is in the OFF (CHG) position.

• (Movie): To record movies

• (Still): To record still images

Recording/Playback

3 Start recording.MoviesPress START/STOP A (or B).

To stop recording, press START/STOP again.

Still Images

Press PHOTO lightly to adjust the focus A (a beep sounds), then press it fully B (a shutter click sounds).

When disappears, the image has been recorded.

•Still images are recorded on the hard disk in the default setting.

Contents

Operating Guide DCR-SR32E/SR42E/SR52E/SR62E/SR72E/SR82E/SR190E/SR200E/SR290E/SR300E Read this first ATTENTION Notice Notes on use On recording Save all your recorded image data Do not apply shock or vibration to your camcorder On the drop sensor Table of Contents Step 1: Checking supplied items On the Remote Commander (except for DCR-SR32E/SR42E) Using the Remote Commander for the first time To change the battery of the Remote Commander WARNING Step 2: Charging the battery pack To remove the battery pack To charge the battery pack using only the AC Adaptor Step 3: Turning the power on, and setting the date and time To reset the date and time Step 4: Preparing for recording Recording To record still images on a “Memory Stick Duo” xInserting/ejecting a “Memory Stick Duo” xTo change the recording media of still images On Easy Handycam operation Playback To adjust the sound volume of movies Parts and functions used for the camcorder 1Power zoom lever 2NIGHTSHOT PLUS switch*1 6Built-inmicrophone 7Remote sensor*3 8Flash*2 9LCD screen q; Zoom buttons qa BACK LIGHT button*4 ws DISC BURN button wd (USB) jack*5 Indicators displayed during recording/playback Recording movies Recording still images Viewing movies Viewing still images Upper left Upper right Center Bottom Saving images Saving images on a computer Creating a DVD with selected images Deleting images To delete all movies or still images at one time Playing the image on a Performing with a computer xFor Macintosh user xFor Windows user xSystem requirements xInstalling software If the screen does not appear Performing various functions - “HOME” and “OPTION” Using the HOME MENU 1 Turn on your camcorder, then press (HOME) A (or B) 2 Touch the desired setup item 3 Follow the guide on the screen for further operation Using the OPTION MENU 1 While using your camcorder, touch (OPTION) on the screen 2 Touch the desired item 3 Change the setting, then touch Items of the HOME MENU (SETTINGS) category Items of the OPTION MENU tab Troubleshooting Notes before sending your camcorder for repair Warning indicators (Warning on the hard disk of the camcorder) Fast flashing E(Battery level warning) (High temperature warning) Slow flashing Fast flashing Precautions On use and care On handling the casing About care and storage of the lens Specifications System Page Input/Output connectors General AC Adaptor AC-L200/L200B Rechargeable battery pack On trademarks