Sony Step 2: Charging the battery pack, To remove the battery pack, 5 Set the camcorder onto the Handycam Station securely

Step 2: Charging the battery pack

POWER switch

Battery pack	CHG
	lamp

DC IN jack

DC plug

AC Adaptor	To the
	wall socket
	Mains lead

Started Getting

You can charge the “InfoLITHIUM” battery pack (H series) after attaching it to your camcorder.

•Your camcorder operates only with an “InfoLITHIUM” battery pack (H series).

1 Attach the battery pack by sliding it in the direction of the arrow until it clicks.

2 Turn the POWER switch in the direction of the arrow to OFF (CHG) (The default setting).

3 Connect the AC Adaptor to the DC IN jack on the Handycam Station.

Be sure that the v mark on the DC plug is facing up.

4 Connect the mains lead to the AC Adaptor and the wall socket.

5 Set the camcorder onto the Handycam Station securely.

The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station.

To remove the battery pack

Turn the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack.

BATT (battery) release lever

•When you remove the battery pack or the AC Adaptor, make sure that the (Movie) lamp/

(Still) lamp (p.9) is turned off.

7