“Memory Stick PRO Duo” media

Operations using the “Memory Stick PRO Duo” media cannot be performed.

If you use “Memory Stick PRO Duo” media formatted on a computer, format it again on your camcorder (p. 62).

Images stored on the “Memory Stick PRO Duo” media cannot be deleted.

The maximum number of images that you can delete on the index screen at one time is 100.

You cannot delete the protected images.

The data file name is not indicated correctly or flashes.

The file is damaged.

The file format is not supported by your camcorder (p. 100).

Recording

Refer also to “Memory Stick PRO Duo” media (p. 87).

Pressing START/STOP or PHOTO does not record images.

The playback screen is displayed. Press MODE to turn on the (Movie) or (Photo) lamp (p. 28, 30).

Your camcorder is recording the image you have just shot on the recording media. You cannot make new recording during this period.

The recording media is full. Delete unnecessary images (p. 44).

Total number of movie scenes or photos exceeds the recordable capacity of your camcorder (p. 94). Delete unnecessary images (p. 44).

While [DROP SENSOR] is activated (p. 77), you may not record images.

The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

The temperature of your camcorder is extremely low. Turn off your camcorder and

take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder.

The ACCESS/access lamp remains lit or flashing even if recording was stopped.

Your camcorder is recording the scene you have just shot on the recording media.

The imaging field looks different.

The imaging field may look different depending on the condition of your camcorder. This is not a malfunction.

The actual recording time for movies is less than the expected recording time of the recording media.

Depending on the recording conditions, the time available for recording may be shorter, for example when recording a fast moving object, etc. (p. 94).

The camcorder stops operating.

The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place.

The temperature of your camcorder is extremely low. Turn off your camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder.

If you keep applying vibration on the camcorder, recording may stop.

There is a time difference between the point when START/STOP is pressed and the point that the recording movie is started or stopped actually.

On your camcorder, there may be a slight time difference between the point where you press START/STOP and the actual point that recording movie starts/stops. This is not a malfunction.

The auto focus does not function.

Set [FOCUS] to [AUTO] (p. 80).

The recording conditions are not suitable for auto focus. Adjust the focus manually (p. 80).

Contents of Table

Techniques Recording Useful

Index

87