Recording an image from a tape as a still image

– DCR-TRV320 only

Your camcorder can read moving image data recorded on a tape in the Digital8 system, and record it as a still image on a “Memory Stick”. Your camcorder can also take in moving image data through the input connector and record it as a still image on a “Memory Stick”.

Before operation

Insert a tape recorded in the Digital8 system and a “Memory Stick” into your camcorder.

(1) Set the POWER switch to VTR.

(2) Press N. The image recorded on the tape is played back.

(3) Keep pressing PHOTO lightly until the picture from the tape freezes. CAPTURE appears on the LCD screen or in the viewfinder. Recording does not start yet.

(4) Press PHOTO deeper. The image displayed on the screen will be recorded on the “Memory Stick”. Recording is complete when the bar scroll indicator disappears.

2 REW PLAY FF

1

MEMORYVTR CAMERA ) OFF ( CHARGE

operations Stick” “Memory

3

CAPTURE 4

PHOTO

PHOTO

When the acccess lamp is lit or flashing

Do not shake or strike the unit. As well do not turn the power off , eject the “Memory Stick” or remove the battery pack. Otherwise, the image data breakdown may occur.

If “” appears on the LCD screen or in the viewfinder

The inserted “Memory Stick” is imcompartible with your camcorder because its format does not comform with your camcorder. Check the format of the “Memory Stick”.

If you press PHOTO lightly in the playback mode

Your camcorder stops momentarily.

Sound recorded on a tape

You cannot record the audio from a tape.

Titles superimposed

You cannot record the titles on the “Memory Stick”. However, you can record the titles which have already been recorded on tapes.

When you press photo on the Remote Commander

 

Your camcorder immediately records the image that is on the screen when you press

85

the button.