Frequently asked questions

Display Service interval

^Call Technical Service for maintenance if the display shows the following message after turning the machine on.

§

Service interval 1

Call the Miele Service Department.

A

The display goes out after 5 seconds.

Fault messages

,Repairs to electrical or steam appliances should only be carried out by a Miele authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work.

Faults that occur before or after the start of a program flash in the display.

If the display remains off, the dryer has no power.

^Check the plug, main switch and fuses on-site.

y

Power failure

Program stop

 

Press Start.

f

^Press h "Start".

This fault message can also indicate that the overload cut-out of the drive motors has over heated.

^Allow the motor to cool.

32

Page 32
Image 32
Miele PW 6161, PW 6101, PW 6131, PW 6201 operating instructions Display Service interval, Fault messages