Removing the shipping struts | Miele PW 6161, PW 6101, PW 6131

Installation Instructions

Removing the shipping struts

Four red-marked shipping struts, two at the front and two at the rear, are each fixed with 3 hex screws.

^Remove the shipping struts at the installation location before using the washer.

^Take off the front and back panel of the machine by removing the screws at the bottom edge of the front service panel and the screws in the rear panel and remove.

Save the shipping struts for future use. They must be refitted if the machine is moved.

Do not move the machine without all of the outer panels in place.

40

Image 40

Miele PW 6161, PW 6101, PW 6131, PW 6201 operating instructions Removing the shipping struts

Contents

Operating Instructions Washer Contents Contents Important Safety Instructions Correct usage of the washer Electrical Safety Grounding Instructions Use Using accessoriesAdditional information Guide to the washer Detergent compartmentsControl panel Emergency Stop button Drum door e Door handle Operating panel Control keys Operator Card Turn on the washer UseSort and load the laundry Maximum dry laundry weights Add detergent§ = Front compartment Rear compartment Detergent Fabric softenerDosage Water hardness Starch BleachFabric dye Detergent container Select a program Select wash options if needed+ i Block Plus Starch Stop Select Delay Start if needed Adjust the program if needed Start the program End of programSpin speed Do not use force Canceling a program Canceling a locked program Program sequence Skipping program cyclesTo go back without skipping a program cycle Program end with water in the drum InformationProgram stop Program Guide Standard Programs Program Fabric Program cycle Warm rinse Washing using the program card Card only operation Extra features Language selection Optional modules Liquid dispensing systemPriming the dispensing pumps Deselect the dispensing Maintenance of the dispensing system Dispensing calibration PC Connection Peak load cut offLoad size Cleaning the exterior Cleaning and CareAfter each use Maintenance during downtime Vent grilleRust Water inlet filters Drum bearing lubrication PW 6161 and 6201 only Frequently asked questions Safety mechanism of the door handle is disengagedReasons for oversudsing Drum door cannot be opened Power failure Emergency door release During a short power failureExtended power failure Draining the wash water Display Service interval Fault messages Check the water supply and press h Start After sales service Guide to the data plate symbols Noise levelPage Installation Instructions Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Installation Instructions Installation site Removing the shipping struts Plumbing Connecting the water intake / water drain hosesCold water connection only Electrical connection Connecting the dispensing pumpsSteam connection Quick Guide All rights reserved 06 578 520