Installation Instructions
The washer must only be installed by a Miele authorized service technician.
Before installation or service disconnect the power supply to the work area.
The minimum dimensions and distance required from the wall, as shown in the installation diagram, must be observed to allow service to be performed and the data plate to be viewed.
Installation site
A concrete or reinforced floor is the most suitable surface for the washer. These types of floors are less prone to vibration during the spin cycle.
The washer must be leveled for proper operation. The machine does not need to be installed on a base, however, any unevenness in the floor must be compensated for.
Do not install or store this machine in a room where temperatures below freezing may occur or where the machine may be exposed to the weather.
Do not install the washer on carpeting. Carpeting will block the washers air vents.
39
