Guide to the washer
Operating panel
aDisplay*
1 | Hot Wash |
| 194 °F |
2 | Cottons |
| 140 °F |
3 | Cottons Intensive |
| 140 °F |
i |
| FC | A |
The display will go into standby mode
10 min. after a program is started. The display will fade. The circle illumination of the h "Start" button lights up. By touching any operating button or the jog shuttle the display will switch back on (exception: power failure or emergency stop button used).
b Control keys
The control keys have different functions depending on the machine status. The functions are shown in the display above each button.
If programed to "Button allocation direct", the first 6 programs from the program list can be selected directly with the control keys 1 to 6.
ch Start button
The circle illumination flashes if a selected program can be started. To start a program press the "Start" button. Once a program has started the Start button can be pressed to show the original display.
*Contents in the display will vary with program offering.
d Optical interface PC
The optical interface on the machine’s control panel provides the connection point for data transfer between the machine’s controls and a PC.
e Jog shuttle
Turn the jog shuttle to display selections and input fields.
Press the jog shuttle to confirm display selections or changes.
f Card reader
For card operation. Washing programs can be uploaded and downloaded for the machine on the program card. The programs on the card can be used to operate the washer.
g I On button
Turns the machine on.
h 0 Off button
Turns the machine off.
i Emergency Stop button
Only use in case of an emergency.
Press the red button to turn the machine off. After clearing the danger, turn the button clockwise to unlock it.
Press h "Start" again to continue the interrupted program.
8
