Installation Instructions
Plumbing
The machine should be connected to two water supply valves, which conform with local and national regulations. Installation must be carried out by an authorized service technician.
To ensure the machine is correctly connected please follow the installation plan and the separate installation instructions supplied with the machine.
Connecting the water intake / water drain hoses
See the enclosed installation plan.
A water pressure flow rate of at least 14.5 psi, maximum 145 psi is required.
The inlet pressure hoses supplied with the machine must be used for connection to the water supply.
The hoses should only be replaced with genuine Miele spare parts which fulfill the pressure requirements.
The hot water intake must not exceed a temperature of 158°F (70°C).
Cold water connection only
See the enclosed installation diagram.
,Must comply with all local codes.
41
