Specifications
AUDIO POWER SPECIFICATIONS:POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
Continuous RMS power output (reference) 60 + 60 watts
(6 ohms at 1 kHz, 10% THD)
Total harmonic distortion less than 0.07%
(6 ohms at 1 kHz, 45 W)
DIN power output (rated) 60 + 60 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference) 80 + 80 watts
(6 ohms at 1 kHz, 10% THD)
Music power output (reference)
135 + 135 watts (6 ohms at 1 kHz, 10% THD)
Inputs |
|
MD/VIDEO IN: | voltage 450 mV/250 mV, |
(phono jacks) | impedance 47 kilohms |
MIX MIC: (phone jack) | sensitivity 1 mV, |
Outputs | impedance 10 kilohms |
| |
MD/VIDEO OUT: | voltage 250 mV |
(phono jacks) | impedance 1 kilohms |
PHONES: | accepts headphones of 8 |
(stereo phone jack) | ohms or more |
SPEAKER: | accepts impedance of 6 to |
SUPER WOOFER: | 16 ohms |
| |
Voltage 1 V, impedance 1 | |
| kilohm |
System | Compact disc and digital |
| audio system |
Laser | Semiconductor laser |
| (λ=780nm) |
| Emission duration: |
| continuous |
Laser output | Max. 44.6 μW* |
| *This output is the value |
| measured at a distance of |
| 200 mm from the |
| objective lens surface on |
| the Optical |
| with 7 mm aperture. |
Frequency response | 2 Hz – 20 kHz (±0.5 dB) |
Wavelength | 780 – 790 nm |
More than 90 dB | |
Dynamic range | More than 90 dB |
CD OPTICAL DIGITAL OUT | |
(Square optical connector jack, rear panel) | |
Wavelength | 600 nm |
Output Level |
Recording system | |
Frequency response | 40 – 13,000 Hz (±3 dB), |
(DOLBY NR OFF) | using Sony TYPE I |
| cassette |
| 40 – 14,000 Hz (±3 dB), |
| using Sony TYPE II |
| cassette |
Wow and flutter | ±0.15% W.Peak (IEC) |
| 0.1% W.RMS (NAB) |
| ±0.2% W.Peak (DIN) |
44