Divar 700 SeriesOperating instructions en 63
5.10.2 | Contact inputs |
If a contact input causes an alarm
–Monitors A and B (hybrid version only) can display an array of
–Monitor A: The border around the displayed cameos is red. The alarm icon is displayed in the corresponding cameo. An alarm status message is displayed.
–The alarm beeper sounds. The alarm 
and the 
indicators flash.
–Controllable cameras might be moved to
5.10.3 | Motion events |
If a motion detection signal causes an event
–Monitors A and B (hybrid version only) can switch to display the motion events.
–The motion icon is displayed in the corresponding cameo. An alarm status message is displayed.
–The motion 
indicator on the front panel flashes.
5.10.4 | Text events |
If a text event signal causes an event
–Monitors A and B (hybrid version only) can switch to display the text events.
–The text event icon (yellow) or text alarm icon (red) is displayed in the corresponding cameo. An alarm status message is displayed.
5.10.5 | Video loss alarm |
If the loss of a video signal causes an alarm:
Monitor A or B (hybrid version only) can be configured to show the video loss signal.
–One or both monitors can switch to a multiscreen view. The lost camera signal is displayed as a black cameo with the video loss message. On monitor A, the border around the camera with the video loss is red. An alarm status message is displayed.
–The alarm beeper sounds.
–The video loss 
and 
indicators flash.
Acknowledging a video loss alarm
Press the acknowledge key 
to acknowlede a video loss alarm.
–The beeper is silent.
–The video loss 
and 
indicators are no longer lit.
–The alarm status message disappears.
–The
If the camera with video loss is visible, the black cameo and the video loss message continue to be displayed as long as there is no video present.
If an alarm is not acknowledged, the beeper switches off after the dwell time but the alarm still needs to be acknowledged.
If 
and 
indicators, switch off after the dwell time.
Bosch Security Systems | Installation and Operation manual | F.01U.246.471 v3.6 2011.11 |
