Bosch Appliances 700 Installation environment, Associated equipment, 2.3.1, Mounting, 2.3.2

Divar 700 SeriesIntroduction en 17

2.3	Installation environment
2.3.1	Mounting
	The Divar 700 Series is supplied as a desktop unit. If desired, the unit can be rack mounted
	using the rack mounting kit supplied with the unit.
2.3.2	Ventilation
	Ensure that the location planned for the installation of the unit is well ventilated. Take note of
	the locations of the cooling vents in the unit's enclosure and ensure that they are not
	obstructed.
2.3.3	Temperature
	Observe the unit's ambient temperature specifications when choosing an installation space.
	Extremes of heat or cold beyond the specified operating temperature limits may cause the
	unit to fail. Do not install the unit on top of hot equipment.
2.3.4	Power Supply
	Ensure that the site's AC power supply is stable and within the rated voltage of the unit. If the
	site's AC power is likely to have spikes or power dips, use power line conditioning or an
	uninterrupted power supply (UPS).

2.4	Associated equipment
	A typical system could contain the following components (not included with the unit):
	– A primary monitor for multiscreen monitoring (monitor A)
	– A second monitor for spot/alarm monitoring for hybrid version (monitor B)
	– Cameras with 1 Vpp composite video outputs
	– IP cameras (see datasheet for supported models)
	–	Amplified microphone(s)
	– Audio amplifier with speaker(s)
	– Video coaxial cable with BNC connectors for connecting the video signals
		Audio cable with RCA connectors for connecting audio signals.
	– AC power supply outlet for the unit that allows for secure isolation (the unit has no on/
		off switch for security reasons)
	– A KBD Intuikey keyboard
	– PC for Bosch Video Client and Configuration Tool applications
	–	Pan/tilt/zoom control units

– ATM/POS bridge device for integrating with ATM/POS applications over RS232C or TCP/ IP socket interface

Bosch Security Systems Installation and Operation manual F.01U.246.471 v3.6 2011.11