![5.7.2Playback](/images/new-backgrounds/44308/44308105x1.webp)
Divar 700 Series | Operating instructions en 53 |
|
|
–To change a video segment in the list, select it and click Change.
–To remove a video segment from the list, select it and click Remove.
The archive list is saved until archiving is carried out. Video segments that have been partially overwritten or deleted from the internal hard drive(s) are removed from the list.
–Place a check mark next to Authenticity check to authenticate the video segments before archiving.
–Select Start to write the video segments to the destination media.
–Select Stop to cancel the archiving process.
–Select Details for an error report if the authenticity check or archiving is unsuccessful. If the total size of the video segments is greater than the media’s free space, then only the first segments that fit are archived. Those segments that are not archived remain in the list so that they can be archived to new media.
5.7.2Playback
Figure 5.13 Local playback menu
By default, the unit uses the local disk set to perform playback operations. This panel allows locally attached devices with archived data to be selected as a source for playback. This feature allows verification of exported video data locally on the unit.
–Current source shows the device currently selected for playback.
–Select a source file name from the list.
–Select Start Playback to playback from the selected source.
If the selected file is on a DVD or USB source, then the file is first loaded into the unit. When the file is fully loaded, playback starts and continues to run even if you toggle to the live mode. While this playback is running no export or event search is available. Switch back to the local disk set to allow these functions.
Bosch Security Systems | Installation and Operation manual | F.01U.246.471 v3.6 2011.11 |