84 en Advanced configurationDivar 700 Series
6.7 | Text data |
6.7.1Bridge
Bridges or terminals for supplying text data are configured here.
Figure 6.14 Configuration menu - Bridge text data
–Port: enter the port for the bridge device.
–Add bridge: click to enter the IP address of a bridge.
–Settings: click to change the settings of the selected device.
–Remove: select a device in the list and click Remove to remove it.
Note:
This optional feature requires a software license to be obtained before it is activated. See Section 6.12.4 Licenses, Page 106.
6.7.2DirectIP
Direct IP sockets for supplying text data are configured here.
F.01U.246.471 v3.6 2011.11 | Installation and Operation manual | Bosch Security Systems |
