Divar 700 SeriesAdvanced configuration en 91
6.9.3 | Setup - Connection 2 |
Figure 6.19 Configuration menu - Network - Setup - Connections
Set up the network parameters for the secondary Ethernet port.
–Enable DHCP to have IP address, subnet mask, and default gateway assigned automatically by the network DHCP server. The actual values are displayed.
–If DHCP is disabled, fill in the IP address, and the Subnet mask.
–The MAC address is read only; it shows the MAC address of the Ethernet adapter.
–Connection shows the status of the physical network connection.
Note:
The secondary network port is limited to the local subnet and does not support remote access.
Bosch Security Systems | Installation and Operation manual | F.01U.246.471 v3.6 2011.11 |
