Bosch Appliances 700 Viewing pictures, 5.3.1, Monitor A, 5.3.2, Monitor B hybrid version only

42 en Operating instructionsDivar 700 Series

5.3	Viewing pictures
	The hybrid version has two monitor outputs, A and B. The way in which these monitors display
	pictures depends on how the system is configured. When an alarm or motion input is
	detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor A,
	B, or both. When multiple alarms or motion occur, camera pictures are combined in a
	multiscreen window on monitor A, B, or both.
5.3.1	Monitor A
	Monitor A is the main monitor. It shows full-screen, quad, or multiscreen live or playback
	pictures of both analog and IP cameras. Status messages, alarms, motion, and video loss
	warnings are also displayed on this monitor. When the menu system is activated it is
	displayed on this monitor.
5.3.2	Monitor B (hybrid version only)
	Monitor B displays full-screen, quad, or multiscreen live pictures of analog cameras.
	Selecting a monitor to control
	To control the display on monitor A:
	1.	Check that the		light on the front panel is lit.
	2.	If	is not lit, press the monitor		key.

To control the display on monitor B:

1.Check that the light on the front panel is lit.

2.If is not lit, press the monitor key

5.3.3Viewing

The drawing shows all possible views for monitor A and B. Some multiscreen views may have been disabled during set up. The Divar model and the number of connected cameras also influence the available multiscreen views.

Single

1

Quad

12

34

4x4

1	2	3	4
5	6	7	8
9	10	11	12
13	14	15	16

3x3

1	2	3
4	5	6
7	8	9

Figure 5.3 Supports single, quad, 3x3, and 4x4 screen viewing

The multiscreen modes can have different multiscreens that can be shown in sequence to display all camera pictures.

F.01U.246.471 v3.6 2011.11 Installation and Operation manual Bosch Security Systems