Divar 700 Series | Advanced configuration en 85 |
|
|
Figure 6.15 Configuration menu - DirectIP text data
DirectIP allows external systems to send text data to the Divar unit for recording with one or more cameras.
Click Add to define a new source system sending text data
1.Enter the source IP address of the external system that sends the text data or 0.0.0.0 to accept data from any external system.
2.Select one of the TCP ports
3.Select the codepage used by the source system to encode characters.
4.Select the camera to store the text data with.
Click on an entry in the list and select Settings to review and update the configuration data of the particular text source system.
Click on an entry in the list and select Remove to remove the selected text source system from the list.
Text data coming from a text source system can be recorded with more than one camera. Use Add to associate the same source system IP address and codepage to a different destination port and assigned camera. Similarly, use Add to associate more than one text source system with the same camera.
Bosch Security Systems | Installation and Operation manual | F.01U.246.471 v3.6 2011.11 |