Bosch Appliances 700 operation manual 5.2Mouse Controls, 5.1.2, Indicators

Divar 700 SeriesOperating instructions en 41

Stop key

		– while in playback mode, press to return to live mode
	Note:
	IP camera numbering starts at 9 on an 8-channel hybrid model and at 17 on a 16-channel
	hybrid model. So on a 16-channel hybrid unit with IP cameras, camera key 1 selects analog
	camera 1 and, when pressed again, IP camera 17.
5.1.2	Indicators
	The indicators on the front panel display light or flash to alert of various operating conditions.
		Power - lights when the unit is powered
		DVD- lights when a DVD is in the unit
		USB - lights when a USB memory device is connected to the unit
		Network - lights when a remote user is connected to the unit
		Record - lights when the unit is recording video
		Playback - lights when the unit is in playback mode
		Monitor A - indicates monitor A is being controlled
		Monitor B - indicates monitor B is being controlled
		Temperature - flashes when internal temperature is outside operational range
		Alarm - flashes when an alarm is detected
		Motion - flashes when motion is detected in a video signal
		Video loss - flashes when video loss is detected for a video input
		System failure - flashes when a system failure is detected

5.2Mouse Controls

All functions controlled by the front panel can, alternatively, be accessed using the supplied USB mouse. All main DVR functions are accessible via the on-screen button panel. To display the panel (monitor A only), move the mouse pointer to the bottom left of the screen. Press ESC to remove it from the screen.

Figure 5.2 On-screen button panel

The buttons and indicators of the on-screen button panel work the same as the keys and indicators on the front panel.

Bosch Security Systems Installation and Operation manual F.01U.246.471 v3.6 2011.11