Divar 700 SeriesAdvanced configuration en 81
6.6 | Motion |
6.6.1 | Motion detection on analog cameras |
| The motion detection feature is configured by selecting the tabs for each individual analog |
| video input. |
Figure 6.12 Configuration menu - Motion on analog cameras
1.Select the Draw cells mode next to the preview window:
–To add cells, draw rectangles in the motion detection area.
–To remove cells, erase rectangles from the motion detection area.
–Select Draw all cells to activate motion detection for the entire preview area.
–Select Erase all cells to clear motion detection for the entire preview area.
–Check the Show grid box to outline grid zones.
2.Adjust the Trigger level slider to set the level of motion that will be detected. Sliding to the right raises sensitivity, sliding to the left lowers sensitivity. The highest value detects even the slightest motion.
3.The Motion indicator gives a visual indication of the activity detected.
4.Select Clear indicator to reset the peak level.
Bosch Security Systems | Installation and Operation manual | F.01U.246.471 v3.6 2011.11 |
