Bosch Appliances 700 6.8Event, 6.8.1General, Auto acknowledge alarms, Alarm dwell time

86 en Advanced configuration Divar 700 Series

6.8Event

Use the Event menu to specify the desired behavior for an active contact input, detected motion, or video loss. The general behavior of events is also set here. Each of the six profiles has a General, Contact, Motion, Text and Video loss tab.

Figure 6.16 Configuration menu - Event - General

6.8.1General

Auto acknowledge alarms

–Enable when alarms should be acknowledged automatically. By default, an alarm must be manually acknowledged.

Alarm dwell time

–Set between 1 and 59 seconds to select the period during which the output relay and the beeper remain active after activation of the alarm.

Sound beeper on alarm

–Enable an audible warning upon an alarm.

Sound beeper on video loss

–Enable an audible warning upon video loss.

Actions when entering this profile

Click Edit... to specify pre-positions for PTZ cameras when this profile is started.

–Enter a pre-position number from 1-1023for each of the PTZ cameras that should be

moved (PTZ must be enabled for corresponding camera input). Any actions that have been configured are listed.

F.01U.246.471 v3.6 2011.11 Installation and Operation manual Bosch Security Systems