Bosch Appliances 700 operation manual Video & Audio, 6.2.1, Analog Channels, General tab

68 en Advanced configurationDivar 700 Series

6.2	Video & Audio
	Use this menu to configure the video and audio inputs.
	On DHR 730 models tabs 1-8 are for the analog cameras. Higher tabs are for IP cameras.
	On DHR 750 models tabs 1-16 are for the analog cameras. Higher tabs are for IP cameras.
	On DNR 730 models tabs 1-16 are for IP cameras.
	On DNR 750 models tabs 1-32 are for IP cameras.
	On models with expanded memory, (revision B models) the bitrates tab follows the camera
	number tabs.
6.2.1	Analog Channels
	The tabs 1-8 or 1-16 across the top of the menu contain the settings for each of the analog
	inputs on a digital hybrid recorder.

Figure 6.4 Configuration menu - Video & Audio - Analog camera

A General tab and a Control tab are available for each analog camera.

General tab

–Enter a name for the selected input. The name can be up to 16 characters long.

–The Enable video input setting enables (default) or disables the video and corresponding audio inputs.

–Auto contrast - enabled to let the system automatically adjust the contrast for the video input.

–Contrast - can be set manually with the slider if Auto contrast is disabled.

–Enable Audio input when an audio source is connected.

–The Level meter indicates the strength of the audio input signal.

–Use the Gain slider to adjust the input sensitivity.

F.01U.246.471 v3.6 2011.11 Installation and Operation manual Bosch Security Systems