78 en Advanced configuration | Divar 700 Series |
|
|
Note:
If Event only recording has been selected under the Normal tab, then the
6.4.5Copy
The copy recording settings function makes it easy to set up recording for all profiles and all cameras. The copy function copies content from within a single profile to other profiles. The camera inputs and the recording modes within each of these profiles can be selected.
To copy recording settings:
1.Check the Copy multiple cameras box to copy several camera inputs within the From profile.
2.Select the profile number to copy from.
3.Highlight the profiles to copy to (highlight the
4.Select the camera input(s) to be copied from, for the profile to be copied.
5.Select the camera inputs to be copied to (hightlight the
6.Check only those recording modes (Normal, Alarm or Motion) that are to be copied.
7.Click Copy.
F.01U.246.471 v3.6 2011.11 | Installation and Operation manual | Bosch Security Systems |