76 en Advanced configuration | Divar 700 Series |
|
|
6.4Recording
Use the Recording menu to configure the recording
Note:
The audio/video settings in a profile also apply to the stream used for remote live viewing.
Figure 6.10 Configuration menu - Recording - Normal
The recording behavior for each of the six profiles is specified in three submenus and then for each individual channel.
1.Select a profile.
2.Choose an individual input channel to configure the settings for recording its video and audio.
3.Select a submenu for Normal, Contact, or Motion recording.
–Normal recording - the default recording mode
–Contact recording - activated upon an contact input event
–Motion recording - activated upon a motion event
6.4.1Normal
Set values for each of the following fields:
–Normal recording mode:
–Continuous - set to record continuously
–Event only - set to record events only
–No Recording - set to disable recording
–
–set between 1 and 120 seconds (only applicable when recording Event only). The recoding for the event starts this amount of time before the event occcurs.
F.01U.246.471 v3.6 2011.11 | Installation and Operation manual | Bosch Security Systems |