Bosch Appliances 700 operation manual 6.8.2Contact, 6.8.3Motion, 6.8.4Text, Actions

Divar 700 Series Advanced configuration en 87

6.8.2Contact

The event behavior can be configured for each of the 16 input contacts in turn.

–Check the Enabled box if the input contact should activate an event.

–Check the Alarm box if the input contact should activate an alarm.

Actions

Click Edit... to set up Recording, Monitor and PTZ actions that should be carried out when this contact is active.

–Recording: highlight the video channels to be recorded at contact recording settings when this input contact is active (highlight the un-numbered box to select all). A list of the selected channels and their recording properties is shown.

–Monitor: highlight the video channels to be displayed on monitors A and B when this input contact is active (highlight the un-numbered box to select all).

–PTZ: enter a pre-position number from 1-1023for each of the PTZ cameras that should be moved (PTZ must be enabled for corresponding camera input).

Any actions that have been configured are listed.

6.8.3Motion

The event behavior for motion detection can be configured for each video channel in turn.

–Check the Enabled box if motion detection should activate an event.

–Check the Alarm box if motion detection should activate an alarm.

Actions

Click Edit... to set up Recording, Monitor and PTZ actions that should be carried out when motion is detected.

–Recording: highlight the video channels to be recorded at motion recording settings when motion is detected (highlight the un-numbered box to select all). A list of the selected channels and their recording properties is shown.

–Monitor: highlight the video channels to be displayed on monitors A and B when motion is detected (highlight the un-numbered box to select all).

–PTZ: enter a pre-position number from 1-1023for each of the PTZ cameras that should be moved (PTZ must be enabled for corresponding camera input).

Any actions that have been configured are listed.

6.8.4Text

The event behavior for text can be configured for each video channel in turn.

–Check the Enabled box if text should activate an event.

–Check the Alarm box if text should activate an alarm.

Actions

Click Edit... to set up Recording, Monitor and PTZ actions that should be carried out when text is detected.

–Recording: highlight the video channels to be recorded at text recording settings when text is detected (highlight the un-numbered box to select all). A list of the selected channels and their recording properties is shown.

–Monitor: highlight the video channels to be displayed on monitors A and B when text is detected (highlight the un-numbered box to select all).

–PTZ: enter a pre-position number from 1-1023for each of the PTZ cameras that should

be moved (PTZ must be enabled for corresponding camera input). Any actions that have been configured are listed.

Bosch Security Systems Installation and Operation manual F.01U.246.471 v3.6 2011.11