Connecting the Digital Network Receiver
16TV with RF Connector Only
1Connect the coaxial cable from the wall outlet (Cablevision cable
network signal) to the Digital Network Receivers CABLE IN jack.
2Connect the Digital Network Receivers TO TV/VC R jack to the TVs
VHF/UHF IN (or RF IN) jack.
3Connect one end of the AC power cord to the Digital Network
Receivers AC IN jack, then connect the plug end to an AC outlet.
4Tune to channel 3 on your TV to see cable channels.
TV
AC cord
Coaxial cable
From wall
outlet
132
CV.book Page 16 Thursday, November 30, 2000 2:13 PM