Using the Remote Control (RM-Y806)
5Using the Remote Control (RM-Y806)Buttons that are highlighted below can also be used to operate your
TV and VCR after you’ve programmed the remote control. For
details, see “Programming the Remote Control” on page6.
✍The following describes the Sony RM-Y806 remote control. If Cablevision supplied you
with a different remote control, see the manual that came with that remote for details.
Button Description
MUTE Mutes the sound. Press again or press VOL to restore the
sound.
VCR POWER Turns the VCR on and off.
TV POWER Turns the TV on and off.
CABLE POWER Switches the Digital Network Receiver between active
and standby modes.
INPUT Selects (toggles through) the video inputs.
VCR FUNCTION Activates the remote control for use with a VCR.
TV FUNCTION Activates the remote control for use with a TV.
CABLE FUNCTION Activates the remote control for use with the Digital
Network Receiver.
VIEWER Displays the Viewer screen (see the Cablevision user
guide for details).
mRewind video.
NPlay video.
MFast-forward video.
z and NRecord (press simultaneously ).
xStop video.
X Pause video.
FAV Displays the Favorites screen (see the Cablevision user
guide for details).
0 – 9 Selects a channel number directly. For example, to select
channel 6, enter 006. Or you can enter 6 and then # (the
ENTER button).
Selects the ”” indicated advertisement frame in the
displayed screen.
#ENTER button, used for confirming channel numbers (see
0-9 description above).
GUIDE Displays the Guide screen (see the Cablevision user
guide for details).
MENU Displays the Menu screen (see the Cablevision user
guide for details).
continued
CV.book Page 5 Thursday, November 30, 2000 2:13 PM