Wiring Instructions
LDVR Series Direct Vent Gas Fireplace
The fireplace, when installed, must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electric Code.
For USA installations follow the local codes and the national electrical code ANSI/NFPA No. 70.
Should this fan require servicing or repair the power supply must be disconnected. For rewiring of any replacement parts refer
Side Panel
FP1231
Back Panel
Log Support
Burner Tray
Side Panel
to Figure 53.
Any electrical rewiring of this fan must be done by a licensed electrician.
Fan
Temperature Sen-
sor
Speed
Control
Black
White
Ground
FP1025
Fig. 53 FK24 fan wiring.
Ceramic Refractory Kits
Ceramic refractory panels are available in kit form for the LDV series appliances
Appliance Model Kit Name
33LDVR 33LDVRCR
36LDVR 36LDVCR
39LDVR 39LDVCR
43LDVR 43LDVCR
Take care when handling the refractory panels as they are fragile until held in place and supported.
Installation Refer to Figures 54 & 55
1.Remove the front window frame assembly.
2.Remove the logs.
3.Place the rear refractory panel in place. Locate the lower edge of the panel in the ledge formed by the top of the rear log support bracket.
4.Slide the side refractory panels into place to hold the rear panel secure. Repeat the procedure on the other side.
5.Replace the logs and window frame assembly.
For aesthetic purposes we recommend aligning the horizontal mortar lines.
Fig. 54 Ceramic panel installation.
Rear Refrac- |
|
tory Panel |
|
| Firebox Back |
Rear Panel | Panel |
| |
Support |
|
Brackets |
|
Rear Log |
|
Support |
|
| FP1232 |
|
|
Fig. 55 Rear refractory panel installation. |
|
|
|
Remote Controls |
|
Optional remote control units are available to control different functions of the appliances
Model | Function/s Controlled |
RCI | ON/OFF |
RC2 | ON/OFF and Temperature |
IMTFK | Wall mounted thermostat control |
(must be used in bedroom installations)
10007317 | 37 |
