Vermont Casting 36LDVR Installation of Logs, Lava Rock & Ember Material, Log Identification Chart

Models: 36LDVR 33LDVR 39LDVR 43LDVR

1 40
Download 40 pages 6.57 Kb
Page 23
Image 23
Installation of Logs, Lava Rock & Ember Material

LDVR Series Direct Vent Gas Fireplace

Installation of Logs, Lava Rock & Ember Material

The logs are fragile and should be handled with care. Keep the packaging material out of the reach of children and dispose of the material in a safe manner.

The individual logs can be easily identified by the numbers cast on the underside of each log.

Log Identification Chart

Location

33LDVR

36LDVR

39LDVR

43LDVR

Front Left

A43

B136

BC15

BD16

Front Right

--

B137

BC16

BD17

Front Center

--

B138

B138

B138

Rear

--

B135

BC14

BD15

Rear Left

A41

--

--

--

Rear Right

A42

--

--

--

Top Center

A44

--

--

BD18

Log Installation

1.Remove the top louvre assembly.

2.Open the bottom louvre.

3.Remove the window frame assembly.

4.Remove log box from inside firebox.

5.Unpack the logs from packaging and remove each log from its wrapping material. Set aside the ember and the lava rock bags.

As with all plastic bags - these are not toys and should be kept away from children and infants.

33LDVR

1.Place rear log left (A41) on rear bracket (ensure the notch on the left end locates against the bend up on the left side of rear bracket.)

2.Place rear log right (A42) on rear bracket (ensure the notch on the right end locates against the bend up on the right side of rear bracket) and just rest the cut out from front log onto the front support.

3.Place front log left (A43). Use the log’s bottom hole to locate it onto rear log left (A41) and just rest bot- tom cut out log onto the front support.

4.Place top log center (A44). Use the log’s bottom hole to locate it onto the knob on the rear log right (A42) and the top log center rest onto rear log left.

5.Place ember material on top of burner. Scatter the ember material over the tiles on the front area of the burner housing. (Fig. 48) Do not pack the ember material. Separate it when unpacked and keep it in a fluffy and loose condition for a more realistic ember effect.

6.Scatter the lava rock material around the firebox base.

Do not place any of the lava rock material on the burner housing assembly.

Rear Left

Top Center

 

(A44)

Rear Right

(A41)

 

(A42)

 

 

Front Left

 

(A43)

LG382

Fig. 41 Correct log placement for 33LDVR.

10007317

23

Page 23
Image 23
Vermont Casting 36LDVR Installation of Logs, Lava Rock & Ember Material, Log Identification Chart, Log Installation, 33LDVR