EB-1 Electrical Box

LDVR Series Direct Vent Gas Fireplace

The ﬁreplace, when installed, must be electrically connected and grounded in accordance with local codes or, in the ab- sence of local codes, with the current CSA C22.1 Canadian Electrical Code.

For USA installations follow local codes and the national electrical code ANSI/ NFPA No. 70.

It is strongly suggested that the wiring of the EB-1 Electrical Junction Box be carried out by a licensed electrician.

Ensure that the power to the supply line has been disconnected before commenc- ing this procedure.

The EB-1 Electrical junction box has been ﬁtted stand- ard on this model to allow for the easy connection of an optional fan kit.

To connect the EB-1 box to the house electrical supply follow the steps below.

1.Unscrew the retaining screw from the EB-1 base plate and remove the EB-1 assembly from the appliance. (Fig. 8)

2.Remove the front cover of the EB-1 box.

3.Remove the plug socket assembly from the EB-1 box.

4.Feed the supply line in through the EB-1 opening in the side of the appliance and then through the back of the EB-1 assembly. (Fig. 8)

5.Connect the black wire of the power supply line to the brass screw (polarized) of the socket assembly.

6.Connect the white wire of the power line to the chrome screw of the socket assembly.

7.Connect the ground wire of the supply line to the green screw of the socket assembly.

8.Reﬁt the socket assembly back into the electrical box and replace the cover plate. Secure the cable with the clamp on the outside of the EB-1 base plate and reﬁt the EB-1 assembly to the unit with the screw removed in step 1.

INSIDE

Electrical Box

Retaining Screw

��

OUTSIDE

BACK	OF	UNIT
	OF	FP580

Fig. 8 EB-1 receptacle.

Electronic Gas Control Valve

This appliance may be ﬁtted with a Synetek ignition module.

Installation of the remote on/off starter switch or wall thermostat on electronic ignition units.

1.Thread the wiring through the holes on the side panels of the appliance. Take care not to cut the wire or insulation on metal edges. Route the wire to a conveniently located receptacle box.

2.Attach the wire to the ON/OFF switch and install the switch into the receptacle box.

3.Connect the white wire from the wall switch or wall thermostat to the white wire terminal from the elec- tronic module. Connect the black wire from the wall switch or the red wire from the wall thermostat, to

the red wire terminal from the electronic module.

10007317

36LDVR, 33LDVR, 39LDVR, 43LDVR specifications

Vermont Castings has long been synonymous with quality craftsmanship and innovation in the field of heating appliances, particularly in the category of wood and gas stoves. Among their remarkable offerings, the 33LDVR, 39LDVR, 43LDVR, and 36LDVR models stand out, each with unique features that cater to a variety of user needs.

The 33LDVR model features a classic design that complements any space while providing efficient heating. With a maximum output of 15,000 BTUs, it is perfect for smaller rooms. One of its main characteristics is the built-in catalytic combustor, which enhances fuel efficiency and reduces emissions. This model also includes a convenient glass door that allows for a beautiful view of the flames, creating a warm ambiance.

Moving up in size, the 36LDVR offers an increased heating capability of up to 25,000 BTUs. This model retains the same elegance and durability as the 33LDVR, constructed from high-quality cast iron. The 36LDVR is equipped with Vermont Castings’ signature dual combustion system, which maximizes fuel efficiency and minimizes smoke. Additionally, the oversized door enhances visibility while maintaining a robust heat output.

The 39LDVR boasts a larger firebox, providing increased heat capacity and longer burn times. It can accommodate logs up to 18 inches long, making it ideal for those who appreciate long-lasting fires. This model also features a patented top-loading capability, which simplifies the refueling process without interrupting heat output. The advanced air control system allows users to fine-tune the burn rate, enhancing efficiency and managing heat distribution effectively.

Finally, the 43LDVR is the powerhouse of the lineup, with an impressive heating capacity of up to 40,000 BTUs. This model is designed for larger spaces, providing superior heat retention and distribution. It features Vermont Castings' innovative refractory lining, which improves heat retention and provides a longer-burning effect. The 43LDVR also includes a state-of-the-art fan system that promotes consistent warmth throughout the room, ensuring comfort even in the coldest weather conditions.

All four models incorporate Vermont Castings' commitment to environmentally responsible heating, with advanced technology that reduces emissions while maximizing efficiency. The aesthetic design, combined with practical features, makes these units a popular choice for homeowners looking to enhance their living spaces with reliable heating solutions. Whether for ambiance or effective heating, the 33LDVR, 36LDVR, 39LDVR, and 43LDVR models truly exemplify the quality and craftsmanship that Vermont Castings is known for.

Vermont Casting 43LDVR, 39LDVR, 33LDVR, 36LDVR EB-1 Electrical Box, Electronic Gas Control Valve

Models: 36LDVR 33LDVR 39LDVR 43LDVR