Installation & Operating Instructions

LDVR Series Direct Vent Gas Fireplace

This gas appliance should be installed by a qualiﬁed installer in accordance with local building codes and with current CSA-B149.1 Installation codes for Gas Burning Appliances and Equipment. For USA Installations follow local codes and/or the current National Fuel Gas Code. ANSI Z223.1/NFPA 54.

In the Commonwealth of Massachusetts, all gas ﬁtting and installation of this heater shall only be done by a licensed gas ﬁtter or licensed plumber.

FOR SAFE INSTALLATION AND OPERATION PLEASE NOTE THE FOLLOWING:

1.This ﬁreplace gives off high temperatures and should be located out of high trafﬁc areas and away from furniture and draperies.

2.Children and adults should be alerted to the hazards of high surface temperatures of this ﬁreplace and should stay away to avoid burns or ignition of clothing.

3.CAUTION: Due to high glass surface temperature chil- dren should be carefully supervised when in the same room as ﬁreplace.

4.Under no circumstances should this ﬁreplace be modiﬁed. Parts removed for servicing should be replaced prior to operating this ﬁreplace again.

5.Installation and any repairs to this ﬁreplace must be performed by a qualiﬁed installer, service agency or gas supplier. A professional service person should be contacted to inspect this ﬁreplace annually. Make it a practice to have all of your gas ﬁreplaces checked annually. More frequent cleaning may be required due to excess lint and dust from carpeting, bedding material, etc.

6.Control compartments, burners and air passages in this ﬁreplace should be kept clean and free of dust and lint. Make sure the gas valve and pilot light are turned off before you attempt to clean this ﬁreplace.

7.The venting system (chimney) of this ﬁreplace should be checked at least once a year and if needed your venting system should be cleaned.

8.Keep the area around your ﬁreplace clear of combustible materials, gasoline and other ﬂammable vapor and liquids. This ﬁreplace should not be used as a drying rack for cloth- ing, nor should Christmas stockings or decorations be hung on or around the ﬁreplace.

9.Under no circumstances should any solid fuels (wood, coal, paper or cardboard etc.) be used in this ﬁreplace.

10.The ﬂow of combustion and ventilation air must not be obstructed in any way.

11.When ﬁreplace is installed directly on carpeting, vinyl tile or any combustible material other than wood, the ﬁreplace must be installed on a metal or wood panel extending the full width and depth of the ﬁreplace.

12.This ﬁreplace requires adequate ventilation and combustion air to operate properly.

13.This ﬁreplace must not be connected to a chimney ﬂue serving a separate solid fuel burning ﬁreplace.

14.When the ﬁreplace is not in use it is recommended that the gas valve be left in the OFF position.

15.These units have been approved for bedroom use.

Proposition 65 Warning: Fuels used in gas, wood- burning or oil ﬁred appliances, and the products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6

WARNING: Check with your electronics manufacturer before installing a television or other electronic de- vice above this ﬁreplace.

IMPORTANT:

PLEASE REVIEW THE FOLLOWING CAREFULLY

Remove any plastic from trim parts before turning the ﬁreplace ON.

It is normal for ﬁreplaces fabricated of steel to give off some expansion and/or contraction noises during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger or car engine.

It is not unusual for your gas ﬁreplace to give off some odor the ﬁrst time it is burned. This is due to the curing of the paint and any undetected oil from the manufacturing process.

Please ensure that your room is well ventilated - open all windows.

It is recommended that you burn your ﬁreplace for at least ten (10) hours the ﬁrst time you use it. If the optional fan kit has been installed, place the fan switch in the “OFF” position during this time.

Locating Your Fireplace

E	A	B
Y		B
Y
	C	X
	C
D
Y	X	B
	X	B

LU584-R

Fig. 1 Locate gas ﬁreplace.

A) Flat on wall	B) Cross corner	C) **Island
D) *Room divider	E) *Flat on wall corner	F) Chase installation
Y) 6” minimum

NOTE: (ﬁg. 1)

**Island (C) and Room Divider (D) installation is possible as long as the horizontal portion of the vent system (X) does not exceed 20’ (610cm). See details in Venting Section.

*When you install your ﬁreplace in(D) Room divider or (E) Flat on wall corner positions (Y), a minimum of 6” (153mm) clear- ance must be maintained from the perpendicular wall and the front side edge of the ﬁreplace.

Refer to (Y) in Figure 1.

10007317

36LDVR, 33LDVR, 39LDVR, 43LDVR specifications

Vermont Castings has long been synonymous with quality craftsmanship and innovation in the field of heating appliances, particularly in the category of wood and gas stoves. Among their remarkable offerings, the 33LDVR, 39LDVR, 43LDVR, and 36LDVR models stand out, each with unique features that cater to a variety of user needs.

The 33LDVR model features a classic design that complements any space while providing efficient heating. With a maximum output of 15,000 BTUs, it is perfect for smaller rooms. One of its main characteristics is the built-in catalytic combustor, which enhances fuel efficiency and reduces emissions. This model also includes a convenient glass door that allows for a beautiful view of the flames, creating a warm ambiance.

Moving up in size, the 36LDVR offers an increased heating capability of up to 25,000 BTUs. This model retains the same elegance and durability as the 33LDVR, constructed from high-quality cast iron. The 36LDVR is equipped with Vermont Castings’ signature dual combustion system, which maximizes fuel efficiency and minimizes smoke. Additionally, the oversized door enhances visibility while maintaining a robust heat output.

The 39LDVR boasts a larger firebox, providing increased heat capacity and longer burn times. It can accommodate logs up to 18 inches long, making it ideal for those who appreciate long-lasting fires. This model also features a patented top-loading capability, which simplifies the refueling process without interrupting heat output. The advanced air control system allows users to fine-tune the burn rate, enhancing efficiency and managing heat distribution effectively.

Finally, the 43LDVR is the powerhouse of the lineup, with an impressive heating capacity of up to 40,000 BTUs. This model is designed for larger spaces, providing superior heat retention and distribution. It features Vermont Castings' innovative refractory lining, which improves heat retention and provides a longer-burning effect. The 43LDVR also includes a state-of-the-art fan system that promotes consistent warmth throughout the room, ensuring comfort even in the coldest weather conditions.

All four models incorporate Vermont Castings' commitment to environmentally responsible heating, with advanced technology that reduces emissions while maximizing efficiency. The aesthetic design, combined with practical features, makes these units a popular choice for homeowners looking to enhance their living spaces with reliable heating solutions. Whether for ambiance or effective heating, the 33LDVR, 36LDVR, 39LDVR, and 43LDVR models truly exemplify the quality and craftsmanship that Vermont Castings is known for.

Vermont Casting 36LDVR, 43LDVR Installation & Operating Instructions, Locating Your Fireplace

Models: 36LDVR 33LDVR 39LDVR 43LDVR