Installing the printer driver

Install the printer driver contained on the supplied CD-ROM to your computer.

1 Make sure that the printer is not connected to the computer.

2 Turn on your computer and start Windows.

•When installing or uninstalling the software in Windows® 2000 Professional, log on Windows as the user name of “Administrator” or “Power user”.

•When installing or uninstalling the software in Windows® XP Professional/Home Edition, log on as a user name with the “Computer administrator” user account.

Notes

•Be sure to close all running programs before installing the software.

•The dialog boxes in this section are those in Windows XP Professional, unless otherwise specified. The installation procedures and the dialog boxes shown differ depending on the operation system.

3 Insert the supplied CD-ROM into the CD-ROM drive of your computer and double-click “Setup” in the CD-ROM.

Notes

•If you connect the printer to your computer before installing the driver, the dialog box to request the driver is displayed. If this occurs, click “Cancel” to close the dialog box. Then remove the printer from your computer and redo the installation procedures.

•If you cancel the installation midway, do the installation procedures from the step 3.

•If the installation fails, remove the printer from your computer, restart your computer, and then do the installation procedures from the step 3.

Continued

computer your from Printing

67 GB