Listening to music of the iPod
You can listen to music of the iPod (see page 3 for compatible iPod models) on the headset.
1 Press and hold the POWER button on the headset for about 3 seconds.The headset indicator (blue) and headset indicator (red) flash together twice and the headset is turned on.
2 Connect the transmitter to the iPod then turn on the iPod and start playback on the iPod.
The transmitter indicator status will vary as follows, and the Bluetooth connection between the transmitter and the headset is established.
Transmitter indicator flashes twice: Power is on
Transmitter indicator flashes (at about
Transmitter indicator flashes twice slowly (at about
If the Bluetooth connection is not established within 5 minutes*, the transmitter automatically turns itself off. In this case, turn it on again by pressing and holding the power button on the transmitter for about 1 second.
* iPod backlight may turn on in this 5 minutes.
Notes
If the Bluetooth connection cannot be established with the headset paired already, try pairing again (page 27).
If playback cannot start automatically, try start playback on iPod.
If you press and hold the power button on the transmitter for about 1 second, the transmitter will connect to the iPod and start playback automatically.
18US