Sony DR-BT30Q If Passcode, 4Select “DR-BT30Q”on the display of the connecting device, 6Start the BLUETOOTH connection from the BLUETOOTH device

3Perform pairing procedure on the connecting device to detect this unit.

The list of detected devices appears on the display of the connecting device. This unit is displayed as “DR-BT30Q.” If “DR-BT30Q” is not displayed, repeat from step 1.

4Select “DR-BT30Q” on the display of the connecting device.

5If Passcode* input is required on the display of a connecting device, input “0000.”

Pairing is complete when the indicator (blue) flashes slowly. The message standing for “Pairing complete” appears on the display of some BLUETOOTH devices.

*Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”

6Start the BLUETOOTH connection from the BLUETOOTH device.

This unit memorizes the device as the latest connected device. Some BLUETOOTH devices may connect with the unit automatically when pairing is complete.

When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display

You may pair the device by setting both this unit and the connecting device to pairing mode. For details, refer to the operating instructions supplied with the connecting device.

Tips

•To pair with other BLUETOOTH devices, repeat steps 1 to 5 for each device.

•To delete all pairing information, see “Initializing the unit” (page 25).

10