
2 Click [OK] to close the message.
Now you are ready to disconnect the drive.
3 Disconnect the USB cable.
Windows XP
With Windows XP, first confirm that there are no programs running and that the drive’s busy indicator is not lit, and then disconnect the USB cable.
Note
If you disconnect the USB cable without performing the procedure outlined above with Windows 2000, the operation of your computer may become erratic or data damaged. Be sure to perform the procedure above before disconnecting the USB cable.
About
This device supports USB 2.0, which provides a much higher rate of data transfer than the earlier USB 1.1 standard.
Connecting this device to a computer that is equipped with a USB 2.0- compliant USB connector or PCI adapter card provides fullest possible drive reading performance and enables
1)When connected to a product that does not support
A system meeting the following requirements is needed in order to use Hi- Speed USB (USB
•
•System equipped with a
2)The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver
software for Windows XP, therefore it is also possible to use this driver software with Windows XP. 3)
3)For details, contact your USB 2.0 adapter dealer or consult the Microsoft Corporation Web site.
Setup
19