ABusy indicator

Indicates the drive status.

Lit (green) :

The power is on.

Lit (orange):

The drive is reading data, playing a music CD, or writing data (packet writing).

Blinking (orange):

The drive is writing data (disc-at-once or track-at- once).

Off: The power is off.

BEject button

Press to open and close the disc tray.

CDisk tray

Insert discs here, label side up.

Hint

When you insert a disc into the drive, make sure that it is under the four pins. When using the drive vertically, make sure that you set the disc inside the two lower pins.

DPower Switch

Press to turn the drive on or off.

(With some models, the power switch is located on the front panel.)

EUSB Connector

Used with a USB cable to connect the drive to a computer or another USB device.

Fi.LINK S400 Connector (6-pin)

Used with an i.LINK cable to connect the drive to a computer or another i.LINK device.

Gi.LINK S400 Connector (4-pin)

Used with an i.LINK cable to connect the drive to a computer or another i.LINK device.

HDC IN Jack

Connect the supplied AC power cord to the AC power adapter. Connect this assembly to the DC IN jack, and then connect the whole to the AC outlet.

Introduction

9