System
Requirements
The drive should be used with a system that meets the following requirements1).
❑
❑CPU: Pentium III, 800 MHz or higher
(with Nero Vision Express: Pentium 4, 1.6 GHz recommended)
❑RAM: 256 MB or higher
❑1 GB (with Nero Vision Express:
10 GB) free hard disk space
❑Operating system: Windows 2000 Professional (referred to as Windows 2000), Windows XP Home Edition or Windows XP Professional (referred to as Windows XP)
❑i.LINK or USB connector
1)The above requirements are the minimum necessary requirements to write to disc normally. Under actual operating conditions, the requirements imposed by your software must also be met. For details, refer to your software documentation.
Notes
•You must use discs that are compatible with the write speed you have selected.
•Writing speed may automatically be adjusted depending on the disc, specified disc speed, or disc conditions such as weight imbalance and eccentricity.
•System meeting the following requirements is needed in order to use USB 2.0 operation with this device.
−
−System equipped with a
card, and running the USB 2.0 EHCI device driver1).
1)The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP.
For details, contact your USB 2.0 adapter dealer or consult the Microsoft Corporation Web site.
•When connected to a product that does not support
•You cannot use the i.LINK and USB interfaces simultaneously.
Incompatible Sony VAIO computers
Regardless of the version of Windows they are running, the following models of VAIO computers are incompatible with the DRX- 710UL when connected through an i.LINK cable.
Products for USA:
Products for Europe:
Products for Japan:
Introduction
7