Installing the USB driver

Before connecting your camera to your personal computer, install the USB driver to the computer. The USB driver is contained together with application software for viewing images on a CD-ROM which is supplied with your camera.

For Windows 98, Windows 98SE and Windows 2000 users

1Turn on your personal computer and allow Windows to load.

2Insert the supplied CD-ROM in the CD-ROM drive of your personal computer.

The application software screen appears.

3Click “USB Driver Installation for Windows 98/98SE, Windows 2000”.

USB driver installation starts.

4Follow the on-screen messages to install the USB driver.

5Connect the USB jack (mini-B) on your camera with the USB connector on your personal computer using the supplied USB cable.

to the USB connector

to the USB jack

 

(mini-B)

USB cable

Push in until the

connector clicks

Personal computer

into place

6Insert a “Memory Stick” into your camera, connect the AC power adaptor and turn on your camera.

“PC MODE” appears on the LCD screen of your camera and the camera is set to communication standby mode. Your personal computer recognizes the camera, and the Windows Add Hardware Wizard starts.

7Follow the on-screen messages to have the Add Hardware Wizard recognize the hardware.

The Add Hardware Wizard starts twice because two different USB drivers are installed. Be sure to allow the installation to complete without interrupting it.

Note

In step 7, make sure that a “Memory Stick” is inserted in your camera. Otherwise, you will be unable to install the USB driver.

26