Symptom | Cause and/or Solution |
Your camera cannot delete | • The image is protected. |
an image. | t Cancel the protection (page 59). |
The power turns off | • If you do not operate the camera for about three |
suddenly. | minutes while the power is on, the camera turns off |
| automatically to prevent wearing down the battery |
| |
| t The |
| activated. Turn on the camera. |
| • The battery is discharged. |
| t Replace it with a charged battery or new |
| alkaline batteries. |
|
|
A file error occurs when | • The image size is larger than 1216×912. |
you play back a file. |
|
|
|
The picture is | • The camera is set to TEXT mode. |
monochrome (black and | t Cancel TEXT mode (page 47). |
white). | • P. EFFECT is set to B&W mode. |
| |
| t Cancel B&W mode (page 52). |
Your personal computer | • The battery level is low. |
does not recognize your | t Use the AC power adaptor (not supplied) |
camera. | |
| • The camera is turned off. |
| t Turn on the camera. |
| • The USB cable is not connected firmly. |
| t Disconnect the USB cable, and connect it again |
| firmly. Make sure that “USB MODE” is |
| displayed on the LCD screen (pages 31, 33). |
| • The USB connectors on your personal computer are |
| connected to other equipment besides the keyboard, |
| the mouse, and your camera. |
| t Disconnect the USB cables except for the ones |
| connected to the keyboard, the mouse, and your |
| camera. |
| • The USB driver is not installed. |
| t Install the USB driver (page 31). |
| • [USB CONNECT] is set to [PTP] in the setup |
| settings. |
| t Set it to [NORMAL] (page 66). |
| • Since the camera is connected to a computer with |
| the USB cable before installing the USB driver, the |
| drive is not recognized by the computer. |
| t Delete the drive which is not recognized, then |
| install the USB driver. For details, see the |
| procedure on page 76. |
|
|
74