Charging the battery pack (not supplied)
You cannot charge the battery pack while your camera is turned on. Be sure to turn off your camera.
DC IN jack | Battery pack (S series) | |
(not supplied) | ||
cover | ||
| ||
| To the wall outlet (mains) | |
| Power cord | |
| (mains lead) |
1Insert the battery pack into your camera.
2Open the DC IN jack cover and connect the DC connecting cable to the DC IN jack of your camera with the v mark facing up.
3Connect the power cord (mains lead) to the AC power adaptor (not supplied) and then to a wall outlet (mains).
The
/CHG lamp lights up when charging begins. When the
/CHG lamp goes off, charging is completed.
After charging the battery pack
Disconnect the AC power adaptor from the DC IN jack on your camera.
Battery remaining indicator
When using an optional “InfoLITHIUM” battery pack, the LCD screen on the camera shows the remaining time for which you can still record or play back images. This indication may not be entirely accurate depending on the conditions of use and the operating environment.
Charging at 10°C to 30°C (50°F to 86°F) circumstances is recommended. When using size AA alkaline batteries, the remaining time is not shown.
Note
When you turn the LCD screen on and off, it takes about one minute for the correct battery remaining time to appear.
12