Installing the USB driver

Before connecting your camera to your personal computer, install the USB driver to the computer. The USB driver is contained together with application software for viewing images on a CD-ROM which is supplied with your camera.

For Windows 98 users

1Turn on your personal computer and allow Windows 98 to load.

2Insert the supplied CD-ROM in the CD-ROM drive of your personal computer.

3Connect the USB jack on your camera with the USB connector on your personal computer using the supplied USB cable.

to the USB connector

to the USB jack

USB cable

Push in until the

connector clicks

Personal computer

into place

4Insert a “Memory Stick” into your camera, connect the AC power adaptor and turn on your camera.

“PC MODE” appears on the LCD screen of your camera and the camera is set to communication standby mode. Your personal computer recognizes the camera, and the Windows 98 Add Hardware Wizard starts.

5Follow the on-screen messages to specify the CD-ROM drive and install the USB driver.

The Add Hardware Wizard starts twice because two different USB drivers are installed. Be sure to allow the installation to complete without interrupting it.

Note

Be sure to insert a “Memory Stick” into your camera before installing the USB driver. Otherwise, you will be unable to install the USB driver.

For Macintosh users

1Turn on your personal computer and allow the Mac OS to load.

2Insert the supplied CD-ROM in the CD-ROM drive of your personal computer.

Playback B

25