1 Preparing the battery pack

For customers in the USA and CanadaPlug
For customers other than those in the USA and Canada

￿

￿

 

CHARGE lamp

CHARGE lamp

Power cord (mains lead)

 

1Insert the battery pack into the battery charger.

• Insert the battery pack as far as it will go, then press the back of the battery pack gently until it clicks.

2Connect the battery charger to the wall outlet (wall socket).

The CHARGE lamp lights up, and charging starts.

When the CHARGE lamp turns off, charging is finished (Normal charge). Also, the CHARGE lamp may turn off when the temperature is outside of the recommended operating temperature (10 to 30°C), as the charger is on standby.

[ Charging time

Full charge

Normal charge

Approx. 300 min.

Approx. 240 min.

 

 

•The table above shows the time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer depending on conditions of use and circumstances.

•See page 27 for the number of images that can be recorded.

•Connect the battery charger to the nearest wall outlet (wall socket).

•When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger.

•Be sure to use the battery pack or the battery charger of the genuine Sony brand.

10