Connecting the camera to your computeraTurn on your computer.

bInsert the “Memory Stick Duo” with the images you want to

copy into the camera.

•For further details on the “Memory Stick Duo,” see page 19.

cConnect the USB cradle (supplied) and the AC Adaptor (supplied), and plug the adaptor into a wall outlet (wall

socket).

AC Adaptor

USB cradle

To a wall outlet

(wall socket)

 

 

 

2

1

•When you copy images to your computer using the battery pack, copying may be failed or cause data corruption by battery shutoff. We recommend that you use the AC Adaptor.

dConnect the USB cable to the (USB) jack of the USB cradle.

USB cable

eConnect the USB cable to your computer.

•When you use a desktop computer, we recommend that you connect the USB cable to the USB connector on the rear panel.

•When using Windows XP, the AutoPlay wizard automatically appears on the desktop. Proceed to page 82.

fConnect the camera to the USB cradle and turn on the camera.

POWER

•Make sure the camera is securely connected to the USB cradle.

USB Mode

Normal

Access indicators*

“USB Mode Normal” appears on the LCD screen of the camera. When a USB connection is established for the first time, your computer automatically runs the used program to recognize the camera. Wait for a while.

*During communication, the access indicators turn red.

•If “USB Mode Normal” does not appear in step 6, confirm that [USB Connect] is set to

[Normal] on the Setup screen (page 107).

•Do not remove the camera from the USB cradle during USB connection, as the image data may be destroyed. To end the USB connection, see the note P on page 80.

computer your on images Enjoying

79