Copying images to your computer

This section describes the process using a Windows computer as an example.

You can copy images from the camera to your computer as follows.

For a computer with a Memory Stick slot

Remove the “Memory Stick Duo” from the camera and insert it in the Memory Stick Duo Adaptor. Insert the Memory Stick Duo Adaptor in the computer and copy the images.

•Even when you are using Windows 95/98/98 SecondEdition/NT, you can copy images by inserting the “Memory Stick Duo” into the Memory Stick slot on your computer.

•If the “Memory Stick PRO Duo” is not recognized, see page 103.

For a computer without a Memory Stick slot

Follow Stages 1 through 4 on pages 76 to 80 to copy images.

•When you are using Windows 2000/Me, install the software (supplied) before proceeding. With Windows XP, installation is unnecessary.

•The screen displays shown in this section are the examples for copying images from “Memory Stick Duo”.

With Windows 95/98/98 Second Edition/ NT:

This camera is not compatible with these version of the Windows operating system. When you use a computer without a Memory Stick slot, use a Memory Stick Reader/Writer (not supplied) to copy images from a “Memory Stick Duo” to your computer.

To copy images in the internal memory to your computer, copy the images to a “Memory Stick Duo” first, then copy them to your computer.

Stage 1: Preparing the camera and the computer1 Insert a ÒMemory Stick DuoÓ with recorded images into the camera.

•When copying images in the internal memory, this step is unnecessary.

2 Insert the sufficiently charged battery pack in the camera, or connect the camera to a wall outlet (wall socket) with the AC Adaptor (not supplied) (page 12).

•When you copy images to your computer using a battery pack with little remaining charge, copying may fail or image data may become corrupted if the battery pack shuts down too soon.

3 Set the mode switch to , then turn on the camera and the computer.

76