The image appears rough right after playback starts.

The image may appear rough right after playback starts due to image processing. This is not a malfunction.

The image does not appear on the TV screen.

Check [Video Out] to see if the video output signal of your camera is set to the color system of your TV (page 57).

Check whether the connection is correct (page 80).

The switch on the cable for multi-use terminal is set to “CAMERA”. Set to “TV” (page 80).

The image does not appear on the screen when a USB connection is made.

The switch on the cable for multi-use terminal is set to “TV”. Disconnect the cable for multi- use terminal or set the switch to “CAMERA” (page 62).

Deleting/Editing images

Your camera cannot delete an image.

Cancel the protection (page 43).

You are using the “Memory Stick Duo” with the write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position (page 97).

You have deleted an image by mistake.

Once you have deleted an image, you cannot restore it. We recommend that you protect images (page 42), or use the “Memory Stick Duo” with the write-protect switch and set the switch to the LOCK position (page 97) to prevent accidental erasure.

The resizing function does not work.

You cannot resize movies and Multi Burst images.

You cannot display a DPOF (Print order) mark.

You cannot display DPOF (Print order) marks on movies.

You cannot cut a movie.

The movie is not long enough to cut (shorter than about two seconds).

Cancel the protection (page 43).

Still images cannot be cut.

Troubleshooting

87