1Connect the camera and the AC Adaptor (supplied),
using the multi-use terminal USB cable (supplied).
2Connect the AC Adaptor to the wall outlet (wall socket).
The PowedCharge hunp lights orange, and charging starts.
• Turn off the camera while charging the battery.
• You can charge the battery pack even when it ispartially charged.
• When the Power/Charge lamp flashes and charging is not finished,
remove and re-insert the battery pack.
• When the PoweffCharge lamp on the camera does not lit even if the AC Adaptor is
connected to the camera and the wall outlet (wall sncket), it indicates that the
charging stops temporarily nu standby. The charging stops and enters the standby
stares automatically when the temperature is outside of the recommended
nperating temperature. When the temperature gets back within the apprnpriate
range, the charging resumes. We recommend charging the battery pack in an
ambient temperature of between 10°C to 30°C (50°F to 86°F).
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If any
malfunctions occur while using the AC Adaptnr, disconnect the plug from the wall
nutlet (wall socket) immediately to disconnect the pnwer snurce.
• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
sncket).
• Be sure to use only genuine Sony brand battery packs, multi-use terminal USB
cable (supplied) and AC Adaptor (supplied).
GB
10