
Notes
•The Scene Recognition function does not operate when you shoot images in the Close focus mode or Digital Zoom mode.
•When the recording mode is set to Burst, or when the Smile Shutter function is activated, Scene Recognition is fixed to [Auto].
•The available flash settings are (Flash Auto) and
(Flash Off).
• (Twilight using a tripod) scenes sometimes cannot be recognized in an environment where vibrations are transferred to the camera even though it is fixed on a tripod.
•Sometimes a slow shutter results when a scene is recognized as a (Twilight using a tripod). Keep the camera still during shooting.
•The Scene Recognition icon appears regardless of(screen display) settings.
•These scenes may not be recognized depending on the situation.
zImages you can shoot with [Advanced]
In [Advanced] mode, the camera shoots two images consecutively with the settings differing as follows when it recognizes (Twilight),
(Twilight Portrait),
(Twilight using a tripod),
(Backlight) or
(Backlight Portrait) scenes, which tends to blur. You can select the desired image from the two images shot.
| First Image* | Second Image |
| Shoot in Slow Synchro | Shoots with sensitivity increased and shake |
|
| reduced |
|
|
|
| Shoot in Slow Synchro with the face | Shoots with sensitivity increased with the face as |
| which the flash strobes on as guide | guide and shake reduced |
|
|
|
| Shoot in Slow Synchro | Shoots with even slower shutter speed without |
|
| increasing sensitivity |
|
|
|
| Shoots with the flash | Shoots with the brightness and contrast of the |
|
| background adjusted (DROplus) |
|
|
|
| Shoots with the face which the flash | Shoots with the brightness and contrast of the |
| strobes on as guide | face and the background adjusted (DROplus) |
|
|
|
* When flash is set to [Auto]. |
|
zWhat is the Anti Blink function?
When set to [Advanced], the camera automatically shoots two images consecutively* when it recognizes (Portrait). The camera will select, display, and record the image which the eyes are not blinked automatically. If the eyes are closed in both images, the message “Blinked eye detected” is displayed.
* except when the flash strobes/when the shutter speed is slow