Fitting the Lens
Use the following procedure to fit the lens. | Note |
|
| Be sure to turn off the power before fitting the lens. | |
1 Remove the retaining rubber which prevents the lens mount
from coming loose, then raiseRetaining rubber the lens fixing lever, and
remove the lens mount cap.
Lens mount cap | Lens fixing lever |
|
2 With the lens fixing lever turned fully counterclockwise, push in the lens, aligning the projection on the lens with the cutout on the camcorder.
Align and push in.
3 Supporting the lens, turn the lens fixing lever fully clockwise. Replace the retaining rubber on the lens mount.
Note
When removing the lens, rotate the lens fixing lever with your finger on the curved part of the lever. You could injure your finger if you rotate the fixing lever with your finger on the tip of the lever.
Connections and Fitting 2 Chapter
Chapter 2 Fitting and Connections | 39 |