Using an AC Adaptor

Using a CMA-8A/8ACE AC Adaptor

Connect the camcorder to the AC power supply as shown in the following figure, and turn the POWER switch of the CMA-8A/8ACE ON.

To AC power source

CMA-8A/8ACE

AC Adaptor

POWER switch: ON

CCQX-3 cable

CAMERA/CCU

DC IN

Using an AC-DN1 AC Adaptor

Mount the AC-DN1 on the camcorder in the same way as a battery, then connect to the AC power source.

To AC power source

Note

When power consumption of the camcorder and accessories is 38 W or higher, use the AC-DN2A/ DN2B AC adaptor (lower than 150 W).

Using the Anton BauerIntelligent Battery System

When using an Anton Bauer battery to power this unit, set “Menu 206 Selecting Battery Capacity Indication (see page 120)” according to the battery.

If the Anton Bauer battery supports remaining capacity indication, a number indicating the remaining capacity can be displayed in the viewfinder.

Contact your Sony dealer for more information.

Connections and Fitting 2 Chapter

Chapter 2 Fitting and Connections

55